http://atomiccity.yuku.com/forums/2 en-us Copyright 2006, Yuku feeds@yuku.com (FeedMaster) webmaster@yuku.com (WebMaster) Sat, 31 Oct 2009 14:18:39 GMT Yuku Feeds 1.0 http://blogs.law.harvard.edu/tech/rss 60 http://static.yuku.com//feed/bypass/images/button-yuku.png http://atomiccity.yuku.com/forums/2 Yuku - free hosted forums and profiles 88 31 {pics-1.1 "http://www.icra.org/ratingsv02.html" l gen true for "http://yuku.com" r (nz 1 vz 1 lz 1 oz 1 cz 1 ) "http://www.rsac.org/ratingsv01.html" l gen true for "http://yuku.com" r (n 0 s 0 v 0 l 0 )) Search Domain q http://yuku.com/search/direct/ http://atomiccity.yuku.com/topic/660/t/Any-ideas-on-how-you-will-display-your-15-Aries-.html I have been thinking on a good way to display the Aries, while it will be displayed on the ground, I haven't decided whether I will use a nice wooden base with cover, or a replica of the actual landing site as used in the film? ]]> feeds@yuku.com (lisfan71) http://atomiccity.yuku.com/topic/660 Wed, 25 Feb 2009 20:26:51 GMT http://atomiccity.yuku.com/topic/655/t/2009-.html
Thanks ]]> feeds@yuku.com (toad u) http://atomiccity.yuku.com/topic/655 Fri, 30 Jan 2009 09:39:58 GMT http://atomiccity.yuku.com/topic/641/t/Early-December-2008-Update.html
(From October)
Molding the lower hull has ACTUALLY started--


What was once a whole lower hull is now a lower hull in 4 quarters, one of which you see here.

feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/641 Sat, 06 Dec 2008 20:04:43 GMT http://atomiccity.yuku.com/topic/603/t/AUGUST-2008-UPDATE.html




What you see here is essentially the model cut in half. I have only 3 parts to make to call this model finished. The first is the conical section that connects
the top of the elevator to the shallow conical section you can see stuck to the ceiling. The second is the video screen seen in the... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/603 Tue, 12 Aug 2008 01:45:47 GMT http://atomiccity.yuku.com/topic/596/t/The-Aries-Kit-is-EXCRUCIATINGLY-Close-to-Being-Finished-.html


This shot shows that the new ceiling part, which is 1/4 of the full ceiling, actually works. And for the first time, the Zero-G Toilet is trimmed and in place. Missing from this shot is the elevator, for two reasons. One, I can't find the master. I know its around here somewhere, but I haven't seen... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/596 Wed, 09 Jul 2008 14:39:14 GMT http://atomiccity.yuku.com/topic/586/t/Aries-Cgi-Cutaway.html feeds@yuku.com (lambo47) http://atomiccity.yuku.com/topic/586 Tue, 03 Jun 2008 04:35:31 GMT http://atomiccity.yuku.com/topic/585/t/Zero-G-how-to-go-Rules-1-to-10-on-an-Aries-1-B.html
ZERO GRAVITY TOILET
PASSENGERS ARE ADVISED TO READ INSTRUCTIONS BEFORE USE

1. The toilet is of the standard zero-gravity type. Depending on requirements, System A and/or System B can be used, details of which are clearly marked in the toilet compartment. When operating System A, depress lever and a plastic dalkron eliminator will be dispensed through the... ]]> feeds@yuku.com (dsscse) http://atomiccity.yuku.com/topic/585 Sun, 01 Jun 2008 21:27:05 GMT http://atomiccity.yuku.com/topic/567/t/Must-be-at-about-the-5-year-mark-.html
I see that there is July 2003 mold making entries... which suggests that the actual pattern work started some time before that.

Is it possible that it has already been five years since Aries was begun?

Could you share with us your feelings about the five year anniversary of the project?

Did you think it was going to be this hard? Are there things you would have done another way?

SMS ]]> feeds@yuku.com (SpacemanSpiff) http://atomiccity.yuku.com/topic/567 Thu, 27 Mar 2008 19:20:19 GMT http://atomiccity.yuku.com/topic/374/t/Does-2008-Look-Better-.html
Were at the end of the year so do you think that 2008 will be the lucky year for the release of the Aries? ]]> feeds@yuku.com (starmanmm) http://atomiccity.yuku.com/topic/374 Mon, 31 Dec 2007 15:41:56 GMT http://atomiccity.yuku.com/topic/376/t/News-but-no-Update-.html




This is the first attempt at doing the pilot figures. This was designed in 3D by Drew Huffman. This version is about 10-15% too small, so it will be regrown. Once the size has been fixed, the clothes will be added.... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/376 Wed, 31 Oct 2007 23:45:42 GMT http://atomiccity.yuku.com/topic/378/t/How-about-a-September-update-.html

However if you are working hard 24/7 on both the "Aries 1-B" and "The Discovery Command Module Kit" (rubs hands with GLEE!)
Ignore me and just keep doin whatcha doin cos its all good! feeds@yuku.com (dsscse) http://atomiccity.yuku.com/topic/378 Mon, 24 Sep 2007 00:10:28 GMT http://atomiccity.yuku.com/topic/377/t/June-2007-Update.html


This is a set continuity photo that I was able to copy at the Frankfurt Kubrick Exhibition a couple of years ago. Compare it to the drawing below.

feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/377 Thu, 07 Jun 2007 00:52:24 GMT http://atomiccity.yuku.com/topic/380/t/May-2007-Update.html




I'll have some photos of the molds and how they are used later, but these photos show the final result. The upper and lower hull pieces are the first parts out of the molds!

Scott ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/380 Tue, 22 May 2007 00:01:38 GMT http://atomiccity.yuku.com/topic/382/t/Aries-the-red-headed-step-child.html
George ]]> feeds@yuku.com (timeslipcreations) http://atomiccity.yuku.com/topic/382 Sun, 08 Apr 2007 07:14:28 GMT http://atomiccity.yuku.com/topic/381/t/January-Update.html feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/381 Sun, 21 Jan 2007 23:30:34 GMT http://atomiccity.yuku.com/topic/383/t/2006-was-supposed-to-be-the-year-.html
I have to agree with those who are steamed about not getting the kit out this year. But, I have to say it is not for lack of trying. Then again, I have to also say the Aries is not the only thing I have to work on. Someone made note that the latest progress I posted was about the large Discovery model. This is true, but that doesn't mean I have... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/383 Sun, 17 Dec 2006 19:43:20 GMT http://atomiccity.yuku.com/topic/384/t/October-2006-Update.html


A template is made following the lines of the cross-section of the ceiling. This template is then attached to a tube that will fit over a pivot. For this to work properly, the centerline of the drawing, the tube and the template all have to match up-- that is, the center of the passenger cabin and the center of the tube align and the template is cut to include the tube.

feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/384 Tue, 10 Oct 2006 01:06:35 GMT http://atomiccity.yuku.com/topic/375/t/How-to-display-a-15-quot-Aries-1B-.html feeds@yuku.com (psklenar) http://atomiccity.yuku.com/topic/375 Sat, 08 Jul 2006 14:29:20 GMT http://atomiccity.yuku.com/topic/386/t/Pictures-from-Wonderfest.html Star Ship Modeler folks have finished posting multiple hundreds of pictures from Wonderfest. Included in this amazing collection of model photographs are 11 from of the Atomic City table, including three of the Aries 1B!!!

If you want to see everything, go to The Wonderfest Pictures feeds@yuku.com (psklenar) http://atomiccity.yuku.com/topic/386 Sat, 08 Jul 2006 14:20:44 GMT http://atomiccity.yuku.com/topic/373/t/ARIES-1-B-ORDERING-INFORMATION.html THIS KIT IS STILL IN DEVELOPMENT. WE ARE TAKING ORDERS FOR THIS KIT, BUT PLEASE EMAIL BEFORE MAKING PAYMENT FOR THE LATEST INFORMATION ON WHEN THIS KIT WILL BE RELEASED.


Also note this is not a limited-production item-- this kit will be made until people stop ordering it!

This kit will be easy to add lights to, but no parts for lighting are provided.

Post... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/373 Sun, 18 Jun 2006 00:02:33 GMT