http://atomiccity.yuku.com/forums/21 en-us Copyright 2006, Yuku feeds@yuku.com (FeedMaster) webmaster@yuku.com (WebMaster) Sun, 27 Jan 2008 19:58:21 GMT Fri, 16 May 2008 10:59:41 GMT Yuku Feeds 1.0 http://blogs.law.harvard.edu/tech/rss 60 http://static.yuku.com//feed/bypass/images/button-yuku.png http://atomiccity.yuku.com/forums/21 Yuku - free hosted forums and profiles 88 31 {pics-1.1 "http://www.icra.org/ratingsv02.html" l gen true for "http://yuku.com" r (nz 1 vz 1 lz 1 oz 1 cz 1 ) "http://www.rsac.org/ratingsv01.html" l gen true for "http://yuku.com" r (n 0 s 0 v 0 l 0 )) Search Domain q http://yuku.com/search/direct/ http://atomiccity.yuku.com/topic/580/t/Atomic-City-Moving.html
We'll be finished with the move before the end of this month (May). Operationally, we'll only be out of... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/580 Thu, 15 May 2008 00:06:20 GMT http://atomiccity.yuku.com/topic/561/t/15-Aries.html

This is a partial casting of the lower hull, only what was needed to check some problems with the baseplate castings. The baseplate is made of 4 identical castings and it is what the engines and landing gear are anchored to. There is a problem with how the engines mount and clearance of a perforated flange that goes around each engine. With the engines located on the existing centers, the flange either contacts... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/561 Mon, 03 Mar 2008 00:23:27 GMT http://atomiccity.yuku.com/topic/560/t/Big-D-CM-CM-Kit-Update.html


I know this doesn't look like much, especially since its not quite done, but this is the new CM master with the replacement Pod Bay door bezels actually, finally in place. Getting these to fit properly was unexpectedly complicated. The problem was very simple-- seat these... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/560 Mon, 03 Mar 2008 00:04:22 GMT http://atomiccity.yuku.com/topic/553/t/General-Update-for-All-Projects.html
ARIES - It looks like I just can't reliably cast the lower hull as a single piece. Have a look at this:



Here you can see how the interior core mold was displaced and allowed extra material to form behind what should have been the true wall of the part (its the colored stuff). This additional thickness is throughout the... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/553 Sun, 27 Jan 2008 20:05:52 GMT