The EVA POD Kit http://atomiccity.yuku.com/forums/4 en-us Copyright 2006, Yuku feeds@yuku.com (FeedMaster) webmaster@yuku.com (WebMaster) Sat, 19 Sep 2009 16:30:34 GMT Yuku Feeds 1.0 http://blogs.law.harvard.edu/tech/rss 60 Yuku http://static.yuku.com//feed/bypass/images/button-yuku.png http://atomiccity.yuku.com/forums/4 Yuku - free hosted forums and profiles 88 31 {pics-1.1 "http://www.icra.org/ratingsv02.html" l gen true for "http://yuku.com" r (nz 1 vz 1 lz 1 oz 1 cz 1 ) "http://www.rsac.org/ratingsv01.html" l gen true for "http://yuku.com" r (n 0 s 0 v 0 l 0 )) Search Search Domain q http://yuku.com/search/direct/ <![CDATA[ Pod Kit Assembly Guide ]]> http://atomiccity.yuku.com/topic/687/t/Pod-Kit-Assembly-Guide.html EVA Pod Assembly Guide

This links to the PDF file for the assembly guide. The guide is 19 pages long, so if you're on a slower connection to the internet, it may take a few minutes to load.

Please note there is no information covering the assembly of the Pilot Figure, other than the sheet covering the clear helmet visor that is included in the kit. ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/687 Sat, 19 Sep 2009 16:29:06 GMT <![CDATA[ Finally starting mine. ]]> http://atomiccity.yuku.com/topic/678/t/Finally-starting-mine-.html After nearly two years, I am finally starting my Pod. The thing that had been holding me up all this time was wanting to do the interior as close to the level of awesomeness as shown here by so many other folks. Welp, it was by abandoning that notion that gave me the impetus to go ahead. I want to build three of these anyway, so this one will be the one left behind on Discovery. Anyone remember their names? Able, Betty and ... ?

Anyhow, this one will give me practice... ]]> feeds@yuku.com (AmodelMan) http://atomiccity.yuku.com/topic/678 Fri, 07 Aug 2009 15:52:17 GMT <![CDATA[ Exterior door pix ? ]]> http://atomiccity.yuku.com/topic/607/t/Exterior-door-pix-.html wrichardstiers@yahoo.com. Also a big thank you to Troy and katsuya. True fellows. ]]> feeds@yuku.com (ZIPPO) http://atomiccity.yuku.com/topic/607 Wed, 27 Aug 2008 20:11:04 GMT <![CDATA[ Cgi pod cutaway drawing ]]> http://atomiccity.yuku.com/topic/583/t/Cgi-pod-cutaway-drawing.html Heres my first test ]]> feeds@yuku.com (lambo47) http://atomiccity.yuku.com/topic/583 Mon, 26 May 2008 14:21:16 GMT <![CDATA[ Research Photos ]]> http://atomiccity.yuku.com/topic/398/t/Research-Photos.html
All of the original threads have been lost to house-cleaning so I thought I'd create a new one. This is needed so I can highlight a new photo sent to my by Phil Sterett - check out the top photo at: pod.paragrafix.com/genera..._shape.htm

Is that cool or what?!?

Definitively shows the top of the front consoles as having the angle to them and more... ]]> feeds@yuku.com (Paulbo) http://atomiccity.yuku.com/topic/398 Fri, 26 Oct 2007 06:04:58 GMT <![CDATA[ MY POD ]]> http://atomiccity.yuku.com/topic/399/t/MY-POD.html Again ...with my lighting and camera...Hal's eye looks orange :(


feeds@yuku.com (Fluke) http://atomiccity.yuku.com/topic/399 Thu, 18 Oct 2007 22:37:18 GMT <![CDATA[ Plastic Bowl perfect for 1/12th POD Interior INFO ]]> http://atomiccity.yuku.com/topic/400/t/Plastic-Bowl-perfect-for-1-12th-POD-Interior-INFO.html
Here is the Total info line up on the plastic Bowl that I used in my Pod.

Its from the Zak Designs line. Studio grace clear small bowl.

The UPC code is 7-07226-33356-0. The 'stock?' number 0025-4233

This is the only photo I can find online...its the smaller of the two bowls...of course the top is cut off and you will need to find the best place to cut the rear sections depending on what your interior is like. Do not be fooled by the color....it is not... ]]> feeds@yuku.com (Fluke2) http://atomiccity.yuku.com/topic/400 Wed, 26 Sep 2007 18:14:42 GMT <![CDATA[ New Pod Build Photos ]]> http://atomiccity.yuku.com/topic/403/t/New-Pod-Build-Photos.html
He feels his English is not good enough for him to post here, but I've told him we have problems understanding each other sometimes, so one more won't make any difference!

I've also told him that by posting here, himself, his use of English might actually improve over time! I think this is a good way for anyone to improve their use of a language, by writing a... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/403 Sun, 23 Sep 2007 11:26:55 GMT <![CDATA[ My God...Its full of stars ]]> http://atomiccity.yuku.com/topic/402/t/My-God-Its-full-of-stars.html
There are more here: www.freewebs.com/flukesmo...odpage.htm
A highly polished aluminum sheet is in place for the bottom of the door to track on.

A view from the oustide of the 'inner' interior shell.... ]]> feeds@yuku.com (Fluke) http://atomiccity.yuku.com/topic/402 Thu, 20 Sep 2007 21:35:47 GMT <![CDATA[ Bowman a tight fit in stock interior ]]> http://atomiccity.yuku.com/topic/405/t/Bowman-a-tight-fit-in-stock-interior.html feeds@yuku.com (SAL9000) http://atomiccity.yuku.com/topic/405 Mon, 10 Sep 2007 16:21:34 GMT <![CDATA[ Hoses ]]> http://atomiccity.yuku.com/topic/406/t/Hoses.html feeds@yuku.com (SAL9000) http://atomiccity.yuku.com/topic/406 Sun, 26 Aug 2007 11:43:53 GMT <![CDATA[ Waldos ]]> http://atomiccity.yuku.com/topic/395/t/Waldos.html


I'm not sure they will fit once Bowman is in with his front pack. Anyone built them for their pods? I'd love to see what you worked out if you did. --Jim ]]> feeds@yuku.com (SAL9000) http://atomiccity.yuku.com/topic/395 Thu, 09 Aug 2007 19:40:54 GMT <![CDATA[ Pod Assembly Site ]]> http://atomiccity.yuku.com/topic/408/t/Pod-Assembly-Site.html
I've finally started to put together my Pod and will be marking the progress on my website. pod.sparknet.ca/

I don't know how much I'll get done this summer, but I've got my eye on a certain moonbus model promised by a certain someone in the fall, so that may put a fire under me.

Cheers. --Jim ]]> feeds@yuku.com (SAL9000) http://atomiccity.yuku.com/topic/408 Wed, 04 Jul 2007 19:49:48 GMT <![CDATA[ POD DOOR Motor! Too good to be true! ]]> http://atomiccity.yuku.com/topic/401/t/POD-DOOR-Motor-Too-good-to-be-true-.html
A worm gear drive (taken form a simple portable CD player) for the EVA pod door.

Of course It would be cut down to just the worm gear and it's motor, as you can see there is plenty of room inside the 'ear muff' section of the 1/12th scale resin EVA Pod. A thin flexible ribbon piece would be attatched to the door then to the worm gear box. quiet and smooth.... I'm sure that it will work just fine.

Moves at a perfect speed with 1.5V... ]]> feeds@yuku.com (Fluke2) http://atomiccity.yuku.com/topic/401 Sat, 21 Apr 2007 07:03:03 GMT <![CDATA[ NEW POD PHOTOS ]]> http://atomiccity.yuku.com/topic/411/t/NEW-POD-PHOTOS.html
New Pod Photos ]]> feeds@yuku.com (Norm) http://atomiccity.yuku.com/topic/411 Sat, 27 Jan 2007 19:03:57 GMT <![CDATA[ Pod kit assembley questions - help please ]]> http://atomiccity.yuku.com/topic/414/t/Pod-kit-assembley-questions-help-please.html Assembly of my pod kit is progressing nicely, but i have a couple of questions
1 - What should i use to attach the consol overlays to the consol?
2 - What colour should i paint the inside of the pilots helmet? White, Black, or the same colour as the outside of the helmet?
3 - I understand the pod headlights were cast from a maglight. What is the part number of suitable lenses?

Many Thanks ]]> feeds@yuku.com (rockhopper040870) http://atomiccity.yuku.com/topic/414 Sat, 28 Oct 2006 09:52:52 GMT <![CDATA[ Pilot Figure and Metal Manipulator Arms (upgrades for older kits) ]]> http://atomiccity.yuku.com/topic/407/t/Pilot-Figure--Metal-Manipulator-Arms-upgrades--older-kits-.html
Photos of Pilot:

feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/407 Thu, 24 Aug 2006 11:51:37 GMT <![CDATA[ Photos of Pod Figure ]]> http://atomiccity.yuku.com/topic/413/t/Photos-of-Pod-Figure.html


In producing this kit, some changes were made when I went from the initial molds to the production molds. These changes are evidenced by the two styles of right arm, which originally was one piece and is now two, and the length of the legs. The longer version came first.



I have been asked, by those who have... ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/413 Tue, 22 Aug 2006 15:28:55 GMT <![CDATA[ ADD-ON: Decals ]]> http://atomiccity.yuku.com/topic/412/t/ADD-ON-Decals.html
I'm working up new signage for the interior and exterior (caution labels, explosive bolts, etc. etc.) and if there's enough interest I'll get them ALPS printed and make them available for others.

So, the question is ... Any interest out there?

Paulbo

Paulbo -- Pod@ParaGrafix.com
]]> feeds@yuku.com (Paulbo) http://atomiccity.yuku.com/topic/412 Sat, 01 Jul 2006 11:45:05 GMT <![CDATA[ How to order the 1:12 scale EVA POD Kit ]]> http://atomiccity.yuku.com/topic/396/t/How-to-order-the-1-12-scale-EVA-POD-Kit.html

NOTE: If you are buying this kit, you DO NOT need to buy the pilot and metal arms separately. Those are made available as an accessory kit for those who bought the EVA Pod kit years ago, when pilot figure and metal arms were not being done. The pilot figure and metal arm parts are now included as part of the EVA Pod kit being sold today. ]]> feeds@yuku.com (CaptCBoard) http://atomiccity.yuku.com/topic/396 Tue, 13 Jun 2006 19:06:18 GMT