ADD-ON: Control Console Overlays for 1/12 Pod

RSS
Email

0 Kudo

Author	Comment
Paulbo	ADD-ON: Control Console Overlays for 1/12 Pod	Lead	[-]
Posts: 213 (07/20/04 05:24:06) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Tags : None I'm finally ready to release the overlays created to fit the plans developed by the Working Group (Forum and Photo Archive). These are made the same way that Scott did for the for the original overlays (even using the same printer, which is a coincidence that I also have one). NOTE: I have received a couple of inquiries so I apparently need to make this a little clearer: These console overlays will NOT fit the stock interior that comes with the kit. These are only useful to those people who are scratch building the Working Group interior which does, in fact, fit within Scott's stock exterior. GO HERE if you want to update your stock interior. All of panels are included, including the circular console on the ceiling. Cost is $10 USD, including shipping in the USA. Slightly more for foreign shipping. You can order them via my new Shopping Cart with PayPal (or send to paypal@paragrafix.com), or use the printable order form on that page.
Unregistered(d)	Overlays	#1	[-]
Posts: 0 (07/20/04 22:25:01) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Stellar overlays Paulbo! An absolute must! Phil
gmoulton	contact info?	#2	[-]
Posts: 23 (07/22/04 13:14:10) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Paulbo, Your work looks like what I need to fill my pods. I tried to contact you and obtain one, but your email address bounced back undeliverable. Can you please check the paypal location and see if I show up? Thanks, Grant
Paulbo	Re: contact info?	#3	[-]
Posts: 213 (07/22/04 17:25:20) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi Grant, Sorry you're having trouble - I checked and there is no payment listed from you. When you went to PayPal.com, did you replace the (at) with @? (I typed it in this way to help try to avoid spam.) I have received a couple of orders already via PayPal, and just tested the address via two other mailboxes (1 through AOL) and it worked fine. Try again, and if you still have trouble you can send off the check via standard mail. If you let me know that you've sent the order I'll make sure it's ready to ship when I get your check. Best, Paul
gmoulton	Great overlays	#4	[-]
Posts: 23 (08/04/04 07:15:32) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Paulbo, These overlays look great. Once I realized that I had the wrong spelling for your name, the order went through well. Now they are in my hands, I see the same detail as I see in the screen shots of the pod interior. Thanks for all the hard work here and throughout the interior. Grant
lunadude	Arrival	#5	[-]
Posts: 141 (08/04/04 07:27:19) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	The panels arrived in the mail yesterday. TOP NOTCH!! Many thanks.
temponaut	Inquiry: Cost of international postage	#6	[-]
Posts: 14 (08/04/04 09:48:14) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi, Paulbo. Though I missed out on the 1/12-scale EVA Pod kits the first time around, Scott has assured me that they will be coming out soon (a relative term, as we all know!), so I am emboldened to send for your brilliant overlays without even having the pod kit in hand. I would like to order two sets of the Working Group version of the overlays (for custom-built rather than stock interior). Im writing in order to inquire about the cost of international shipping. I live in Tokyo and would like my overlays sent to me here. I tried sending this message to you via e-mail, but it bounced back. Apparently others have had this problem with your address, too. For your reference, my postal code is 150-0012. As soon as I hear from you, Ill have money on the way to you via PayPal. Many thanks in advance and, again, oustanding job on those control panels! Best regards, Gary (temponaut)
Paulbo	Re: Inquiry: Cost of international postage	#7	[-]
Posts: 213 (08/04/04 13:46:38) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi Gary, I'm sorry you're having trouble with the email - we think Grant had trouble with the spelling of paragrafix as he got through in the end. Shipping to Japan would be $9.00 for Priority mail (4-6 days) or $17.00 for Express (3-5 days). I would suggest either of these methods over the much expensive (roughy $5.30 depending on the exact weight of the packaging) standard airmail because of the better packaging and the fact that the Postal Service seems to take better care of the cardboard mailers they supply. I will send it whichever method you'd like - if you select standard airmail, I will endevour to make the packaging as rugged as possible. All orders are shipped wrapped in tissue paper, then rewrapped in celophane for waterproofing, and finally backed with cardboard for strenth - I will put yours in a padded envelope if you go airmail. Best, Paul
Unregistered(d)	overlays	#8	[-]
Posts: 0 (08/21/04 16:37:19) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	They arrived (!!) and boy are they ever great!! Crisp, consistent print quality throughout. One very, very happy nerd here!! Many thanks! Scott
Paulbo	Re: overlays	#9	[-]
Posts: 213 (08/21/04 16:41:39) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi Scott, Great! Glad they arrived in good order. By the way (and this goes for everyone who's already ordered), I'll be sending out a supplemental sheet with the two round consoles on the front wall. I had been intending that these would be solid pieces like I built the rear console, but when that didn't work out as well as I'd like, I decided to do them the same as the main consoles. Since I designed them up for myself, I decided that everyone else should get them as well. I'll post photos later this week when I've finished tweaking them. All my best, Paulbo
Doctor Payne	Re: overlays	#10	[-]
Posts: 135 (08/23/04 05:48:22) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	I must say I find this QUITE annoying, since I finished my pod stock a couple years ago John P
Paulbo	Re: overlays	#11	[-]
Posts: 213 (08/23/04 10:17:49) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi John, Well, with the Pod's upcoming release, you can always do another one with the accurized interior Paulbo
Paulbo	New Parts on Way	#12	[-]
Posts: 213 (11/09/04 09:12:31) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hello to everyone who's already placed an order ... Just to let you know that have (finally) shipped out the supplemental overlays of the two front wall consoles. If you placed an order and haven't received the supplement by about 11/17/2004 drop me a line and let me know. BTW: If you have the V1.1 (or later) overlays these consoles are already included on your sheet and you won't be receiving the update. Best, Paulbo Paulbo -- Pod@ParaGrafix.com
Unregistered(d)	supplemental overlays	#13	[-]
Posts: 0 (11/25/04 11:11:10) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Paul, This is a little belated but better late than never. Just wanted to say that I'm so impressed that you sent the additional overlays! They are excellent of course, but mostly it's really great that you delivered as promised even though this is really extra and way more than expected. Hve a very happy big ugly chook day! Scott
Paulbo	Re: supplemental overlays	#14	[-]
Posts: 213 (11/27/04 07:56:27) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi Scott, Glad you received the extra panels! It was my pleasure to send out the supplements - I started this as a project for myself and am so happy that everyone is pleased with them. Best, Paul Paulbo -- Pod@ParaGrafix.com
EVAPOD man	Attempting to reach	#15	[-]
Posts: 81 (03/07/05 15:32:31) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	I've been trying to reach you but all my e-mails have bounced back. Let me know if your address has changed.
Paulbo	Re: Attempting to reach	#16	[-]
Posts: 213 (03/08/05 09:57:49) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	So sorry to everyone who's been trying to reach me. My spam blockers apparently decided that my PayPal emails were spam so it shot them all back. I've sent out emails to everyone who's ordered overlays - they'll be going out tomorrow. To anyone who's tried to email me "normally", please note that I believe I've fixed this. Don't know what happened to the Pod@paragrafix account, but I think I've fixed that as well. Paul Paulbo -- Pod@ParaGrafix.com
Paulbo	LOOKING FOR LEE STANTON	#17	[-]
Posts: 213 (03/28/05 12:27:24) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi all, I got an email from Lee Stanton who's got an email address ending in @insightbb.com - for some reason your emails keep getting rejected with "unknown host (email)@insightbb.com". Lee, please contact me again and we'll see if I can't get back to you. Maybe try another email address, or use the contact info on my website www.paragrafix.com. Paul Paulbo -- Pod@ParaGrafix.com
Paulbo	Stock back in ... Stock (maybe)	#18	[-]
Posts: 213 (05/17/07 06:05:00) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	<EDIT> OK - I've been remiss in posting this but as I mentioned before, I've been terribly busy. The new overlay material worked out admirably and I'm back to producing overlays. Order away at your convenience. </EDIT> Paulbo -- Pod@ParaGrafix.com
Paulbo	New Ordering Site	#19	[-]
Posts: 207 (03/04/08 08:48:12) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Hi All, With the anticipation of finally branching out with products for model other than the Pod (go figure!), I decided it was time to create a new website that actually looks good. You can check it out at: http://modeling.paragrafix.com/products/pod.asp Cheers, Paulbo Paulbo -- Pod@ParaGrafix.com

<< Previous Topic Next Topic >>

Yuku free message boards

ADD-ON: Control Console Overlays for 1/12 Pod

ADD-ON: Control Console Overlays for 1/12 Pod

Quick Reply